Banquet Milling Machine
Cost-effective – Secure – Variable
Overbanking on roads and paths prevents natural water drainage. With the HEN BKF1200 you prevent damage to roads and dangers to traffic.
Banquet Milling Machine
Cost-effective – Secure – Variable
Overbanking on roads and paths prevents natural water drainage. With the HEN BKF1200 you prevent damage to roads and dangers to traffic.
About the HEN product: BKF1200
The HEN BKF 1200 bank cutter skidder for front or rear attachment.
Excessively high banks on paths and roads are milled away and ensure optimum water drainage.
Technical data:
- Stable base frame with three-point mounting for rear attachment cat. II or III and parking feet
- Base frame can also be used for other attachments
- Standard as rear-mounted machine
- Three-point linkage on both sides optional
- Main gearbox with 540 rpm PTO input speed for direct power transmission
- Extremely high power transmission 1-3/8 inch
- Freewheel integrated in gearbox
- Side output with drive shaft and double universal joint Rotor with striking circle diameter 770 mm
- Working speed: 1.5 – 4 km/h
Features:
- Extremely high output per hour
(even with extremely high banks) - Oversized mechanical drive of the milling rotor
- Skidding and spreading up to 30 metres
(or depositing directly on the embankment is possible) - Modular system allows many variations, e.g. front or rear attachment; right- or left-hand design; drive mechanical or hydraulic
- Working tools can be changed; many attachment variations possible
Areas of application:
- Road maintenance services
- Construction company
- Contractors
- Farmers, building yards and municipalities
- Rural and federal roads as well as agricultural roads
More Information:
Water must be able to run off the roadway into the verge as quickly as possible and seep away there. This prevents or avoids damage to roads and paths.
The HEN BKF1200 is the ideal solution with an extremely high performance.
- Cost-effective verge maintenance
- Dry road surfaces
- Less damage to road surfaces
- Safer corridor roads
WHY IS ROAD MAINTENANCE IMPORTANT?
Cost efficiency through prevention:
- Regular inspections and repairs identify and rectify potential damage at an early stage.
- Avoid expensive renovation work on neglected infrastructure.
- Long-term cost savings and assurance of safety and quality of life.
Safety aspects:
- Maintenance of cycle paths, footpaths, roads, squares and forest tracks is crucial for safety.
- Potholes, ruts, standing water and overgrown verges as safety risks.
Environmental protection and prevention:
- Regular inspections for early detection and repair of cracks and defects.
- Continuous refurbishment and repair of surfaces as a commitment to the safety and functionality of the infrastructure.
- Use of modern materials such as asphalt for efficient and sustainable road construction work.
Banquet tiller BKF1200
With the banquet tiller from HEN AG, it is possible to mill off excessive banquets on roads and paths that would otherwise prevent good water drainage. With extremely high performance, the existing material can be thrown up to 30 m away after it has been milled and shredded and thus well distributed or simply placed on the banquet. In addition, the tiller can be mounted very variably on the carrier vehicle. Safe, inexpensive and powerful!
FREQUENTLY ASKED QUESTIONS
Why is path maintenance important?
Cycle paths and sidewalks, roads, but also larger squares and forest paths should be maintained regularly, not just for visual reasons. Potholes, lanes, water that does not drain away, overgrown banquets and much more can be dangerous for drivers, cyclists and sometimes pedestrians. The care and maintenance of such roads/paths is therefore very important to ensure safety.
What is a path maintenance device?
A path maintenance device supports the maintenance and renovation of roads and paths, as this work would hardly be possible for people to do by hand. Working with these machines also offers enormous savings in terms of effort and time.
