HEN STONE CUTTERS AND STONE CRUSHERS
The crushing process of HEN technology is designed to crush stone, asphalt and concrete residues, rootstocks and root outgrowths without much effort and by low wear of the equipment. For soil cultivation, stone working, reclamation, crushing and clearing work, our cultivation milling machines can be used excellently.
The surfaces are completely milled through with the HEN stone cutters, larger stones or roots as well as tree stumps are crushed in the process. The milling depth can be adjusted and can be up to 40 cm. Due to slowly rotating rotors and special round shank tools, coupled with the extremely robust gear drives running in an oil bath, HEN milling machines can transmit enormous power.
The result is very convincing and the soil can be planted and sown immediately. The use of stone cutters is especially useful in arable farming to improve the soil and subsequent work, e.g. with the seed drill, is carried out without damage because large stones no longer cause breakage on the machine. There is a suitable device for every tractor. However, it is important to make sure that both fit together.
THE DIFFERENT TYPES OF PROCESSING WITH THE STONE CRUSHER
The forest mulching
Mulching optimally prepares the planting areas for the next planting period. At the same time, bushes/shrubs and rootstocks are removed.
The HEN mulchers serve more as recultivation mulchers than as forestry mulchers. When recultivating, the areas are deeply milled, and rootstocks and roots are also shredded. The area can be used again without any problems after the cultivation.
Among other things, the following work can be done with the forestry tiller:
- construction site clearance
- creating firebreaks
- creation of back alleys
- abandoned area maintenance
- rootstock removal
The stone milling machine on the field
There are many advantages that a stone milling machine brings to the field:
- higher crop yields
- the available material remains in the field
- fast work guaranteed
- the field is ready for seeding after cultivation
- no more piles of stones at the edge of the field
- the soil is loosened
- the low rotor speed means that hardly any milling brine / soil compaction is produced
Some equipment from HEN AG
The HEN tiller RBM-LL for mounting on tractors from 50 to 160 hp is ideal for small areas or for tilling up solid materials. A tiller for versatile use, like tilling and mixing root residues, broken wood and rootstocks in wild meadows, clear cuts and construction sites.
>>Learn more about the HEN RBM-LL
The HEN path construcion tiller/crusher RBM-L is used for milling and crushing work on forest and corridor roads. The HEN stone tiller ensures optimum grain grading during road rehabilitation. Not only is the HEN RBM-L excellent to be used in road construction and maintenance, but also for breaking stones in vineyards or arable land in order to avoid consequential damage during further processing.
>>Learn more about the HEN RBM-L
With the forest and cultivation tiller HEN RBM-M you can recycle medium-thick bituminous pavements, mill and crush pavements with large stones, and mix a new pavement. The HEN RBM-M is perfectly suitable to be used on road construction and maintenance.
>>Learn more about the HEN RBM-M
The HEN cultivation tiller RBM-S is used to crush branches, brushwood, stones, roots and other useless material and to process the soil so that it can be used again. The HEN RBM-S is particularly characterized by it’s low-turn milling rotor and housing made of Domex special steel.
>>Learn more about the HEN RBM-S