Banquet Milling Machine
Cost-effective – Secure – Variable
Overbanking on roads and paths prevents natural water drainage. With the HEN BKF1200 you prevent damage to roads and dangers to traffic.
Banquet Milling Machine
Cost-effective – Secure – Variable
Overbanking on roads and paths prevents natural water drainage. With the HEN BKF1200 you prevent damage to roads and dangers to traffic.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
About the HEN product: BKF1200
The HEN BKF 1200 bank cutter skidder for front or rear attachment.
Excessively high banks on paths and roads are milled away and ensure optimum water drainage.
Technical data:
- Stable base frame with three-point mounting for rear attachment cat. II or III and parking feet
- Base frame can also be used for other attachments
- Standard as rear-mounted machine
- Three-point linkage on both sides optional
- Main gearbox with 540 rpm PTO input speed for direct power transmission
- Extremely high power transmission 1-3/8 inch
- Freewheel integrated in gearbox
- Side output with drive shaft and double universal joint Rotor with striking circle diameter 770 mm
- Working speed: 1.5 – 4 km/h
Features:
- Extremely high output per hour
(even with extremely high banks) - Oversized mechanical drive of the milling rotor
- Skidding and spreading up to 30 metres
(or depositing directly on the embankment is possible) - Modular system allows many variations, e.g. front or rear attachment; right- or left-hand design; drive mechanical or hydraulic
- Working tools can be changed; many attachment variations possible
Areas of application:
- Road maintenance services
- Construction company
- Contractors
- Farmers, building yards and municipalities
- Rural and federal roads as well as agricultural roads
More Information:
Water must be able to run off the roadway into the verge as quickly as possible and seep away there. This prevents or avoids damage to roads and paths.
The HEN BKF1200 is the ideal solution with an extremely high performance.
- Cost-effective verge maintenance
- Dry road surfaces
- Less damage to road surfaces
- Safer corridor roads
WHY IS ROAD MAINTENANCE IMPORTANT?
Cost efficiency through prevention:
- Regular inspections and repairs identify and rectify potential damage at an early stage.
- Avoid expensive renovation work on neglected infrastructure.
- Long-term cost savings and assurance of safety and quality of life.
Safety aspects:
- Maintenance of cycle paths, footpaths, roads, squares and forest tracks is crucial for safety.
- Potholes, ruts, standing water and overgrown verges as safety risks.
Environmental protection and prevention:
- Regular inspections for early detection and repair of cracks and defects.
- Continuous refurbishment and repair of surfaces as a commitment to the safety and functionality of the infrastructure.
- Use of modern materials such as asphalt for efficient and sustainable road construction work.
Banquet tiller BKF1200
With the banquet tiller from HEN AG, it is possible to mill off excessive banquets on roads and paths that would otherwise prevent good water drainage. With extremely high performance, the existing material can be thrown up to 30 m away after it has been milled and shredded and thus well distributed or simply placed on the banquet. In addition, the tiller can be mounted very variably on the carrier vehicle. Safe, inexpensive and powerful!
Technical benefits and economic value of the BKF1200 Banquet tiller
The BKF1200 combines a robust construction with practical functionality and delivers excellent results in everyday use. Designed for demanding, continuous operation, this Banquet tiller ensures consistently clean milling performance – even under challenging working conditions. Whether used on federal roads, rural tracks, or municipal routes, it represents a smart long-term investment thanks to its durability, user-friendly handling, and efficiency.
Those seeking a reliable, high-performance, and cost-effective bankett milling solution will find the BKF1200 to be a machine that meets practical demands while offering excellent build quality, intuitive operation, and sustainable value – day after day.
WHY IS ROAD MAINTENANCE IMPORTANT?
Cost efficiency through prevention:
- Regular inspections and repairs identify and rectify potential damage at an early stage.
- Avoid expensive renovation work on neglected infrastructure.
- Long-term cost savings and assurance of safety and quality of life.
Safety aspects:
- Maintenance of cycle paths, footpaths, roads, squares and forest tracks is crucial for safety.
- Potholes, ruts, standing water and overgrown verges as safety risks.
Environmental protection and prevention:
- Regular inspections for early detection and repair of cracks and defects.
- Continuous refurbishment and repair of surfaces as a commitment to the safety and functionality of the infrastructure.
- Use of modern materials such as asphalt for efficient and sustainable road construction work.
What is a banquet milling machine and what is it used for?
Banquet milling machines, also known as Verge cutters, are specialized equipment designed for the maintenance of roadsides and unpaved shoulders. Their primary function is to remove, shape, or restore roadside verges to ensure the long-term stability and functionality of road edges.
Typical applications include:
- Restoration of road shoulders following erosion or heavy vehicle use
- Removal of vegetation, sediment, or windblown material
- Preparation of shoulders for new fill or gravel layers
Modern bankett milling machines such as the BKF1200 are built for reliability even under demanding conditions – including changing soil structures, narrow roadside areas, or sloped terrains.
Advantages of milling over alternative methods
Compared to conventional verge maintenance using excavators or grading blades, a purpose-built verge cutter offers both technical and economic benefits:
- Consistent milling depth – ensures a clean, profile-accurate surface
- Reduced material loss – precise removal without disturbing stable sublayers
- Enhanced operator safety – no manual work required in hazardous edge zones
- Greater efficiency – milling, profiling, and surface preparation in one continuous operation
For long distances or recurring maintenance tasks, investing in a professional verge milling machine like the BKF1200 pays off quickly and sustainably.
FREQUENTLY ASKED QUESTIONS
Why is path maintenance important?
Cycle paths and sidewalks, roads, but also larger squares and forest paths should be maintained regularly, not just for visual reasons. Potholes, lanes, water that does not drain away, overgrown banquets and much more can be dangerous for drivers, cyclists and sometimes pedestrians. The care and maintenance of such roads/paths is therefore very important to ensure safety.
What is a path maintenance device?
A path maintenance device supports the maintenance and renovation of roads and paths, as this work would hardly be possible for people to do by hand. Working with these machines also offers enormous savings in terms of effort and time.
What is the purpose of a verge cutter?
Verge cutters are used to mill, shape, or remove the side areas of roads – known as verges or shoulders. Their main purpose is to restore the structural integrity of the road edge, improve drainage, and maintain road safety over the long term.
When is the use of a banquet cutter recommended?
A banquet cutter is particularly useful when verges are damaged, overgrown, or have subsided. It also provides a quick and cost-effective solution for repairing road edges after heavy rainfall or erosion damage.
What are the advantages of milling compared to traditional methods?
Milling with a verge cutter is typically faster, more precise, and less material-intensive than conventional methods using excavators or grading blades. It creates a consistent profile that can be immediately used for reconstruction or material backfilling.
